1). It is small in size and light in weight, with a tethered box weighing only 3.6kg. It is easy to carry with a backpack for storage.
2). Replace the Primary battery, without changing any structure of the UAV, and seamlessly switch between tethering or releasing.
3). The operation is simple, and the entire process of drone takeoff and landing does not require the operation of the mooring box. The button type take-up function is also available.
4). The onboard power supply has a constant voltage output, and the backup battery has no charging or discharging phenomenon throughout the entire process, without losing power or causing hidden damage.
2. Adapted to DJI M3 drone
1). Support flight duration: ≥ 8h.
2). Support flight altitude: ≥ 50m(standard tether cable 55m, 33m is an optional).
3. Functional characteristics
1). Cable reel in&out function: Passive wire reel out, long press the button to automatically reel in cable, and backup battery to activate cable reel in function in case of power cut off.
2). Protection function: Separate design for strong and weak electricity. Input overvoltage and undervoltage protection. Output overvoltage, overcurrent, short circuit, over temperature protection, fault elimination and self recovery.
3). Equipment portability: With a backpack design, the backpack can be equipped with a complete tethering system that includes a tethering box, onboard power supply, and other accessories. The overall weight is 5.0 ± 0.2kg.
4). 1800W/3500Wh outdoor mobile power bank or 1200W/2.5L generator is recommended.
Items |
Technical parameters |
|
Ambient temperature |
-20~45 ℃ (working), -40~65 ℃ (storage) |
|
Relative humidity |
10-80% RH (working), 5-90% RH (storage) |
|
Altitude |
≤ 3000m |
|
Ground power module |
Input voltage |
190-240Vac wide range input, single-phase 220Vac, frequency 45-65Hz |
Output power |
800W (rated long-term output), 1000W (peak value ≥ 30s) |
|
Storage cable length |
Standard storage cable 55m |
|
Interface |
AC Input socket, cable output XT60 |
|
Button |
High voltage button, take-up button |
|
Protection level |
IPx4 |
|
Size |
D265 *W150*H175 ± 0.5mm, excluding foot pads and handles |
|
Weight |
4.2 ± 0.1kg, including 33m tethered cable |
|
Tether cable |
Material quality |
Silver plated lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer |
DC resistance |
38 ± 0.2 Ω, 100m@20 ℃ loop |
|
Tensile strength |
≥ 50kg, resistant to repeated retraction and release times ≥ 500 times |
|
Insulation strength |
≥ 3000Vdc, no breakdown for 1 minute |
|
Cable length |
55 ± 2m, 33m is optional; |
|
External diameter |
2.2 ± 0.1mm |
|
Weight |
0.65 ± 0.05kg/100m |
|
Air module |
Input voltage |
350-410Vdc wide range input |
Output voltage |
17.2 ± 0.2Vdc, constant voltage output, supporting voltage customization |
|
Output power |
600W (rated long-term output), 800W (peak value ≥ 10s) |
|
Protection Function |
Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, and over temperature protection |
|
Isolation voltage |
3000V (Vin Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon |
|
Installation method |
Tool free snap on installation |
|
Heat dissipation method |
Passive heat dissipation, natural air cooling of heat dissipation teeth |
|
Interface |
Input XT60, output XT30*2 |
|
Protection level |
IP54 |
|
Size |
105*56*25 ± 0.5mm, without mounting bracket |
|
Weight |
210 ± 10g, without external connectors |
1. Unless otherwise specified, the above data are all tested at Ta=25 ℃, humidity<75%, nominal input, and rated load.
2. Due to space limitations, there is incomplete data in the table. If necessary, please contact our sales personnel to obtain it.