1). It is small in size and light in weight, with a tethered box weighing only 3.6kg. It is easy to carry with a backpack for storage.
2). The operation is simple, and the entire process of drone takeoff
and landing does not require the operation of the tethering box.
3). Comprehensive input and output protection function, fault elimination and self recovery.
4). Button type wire reel in&out function, allowing manual to press the button to reel cable in and out in case of power cut off.
5). The on-board power supply output at constant voltage, and the standby battery has no charging, no discharging and no battery capacity loss.
2.Adaptive drone
1). Support flight altitude: 10-50m (tethered cable 33m, 55 meters is an optional).
2). Support takeoff weight: 1-3kg (drone power efficiency varies, this data is for reference only).
3). Support flight duration: ≥ 8h (the system can support working duration, which depends on the structure and electrical fatigue resistance of the drone).
3. Functional characteristics
1). Automated cable reel in&out function: Passive wire reel out, long press the button to automatically reel in cable, and backup battery to activate cable reel in function in case of power cut off.
2). Protection function: Strong and weak current separation design. Input overvoltage and undervoltage protection. Output overvoltage, output overcurrent, output short circuit, output over temperature protection, fault elimination and self recovery.
3). Equipment portability: With a backpack design, the backpack can be equipped with a complete tethering system that includes a tethering box, onboard power supply, and other accessories. The overall weight is 5.0 ± 0.2kg.
4). 1800W/3500Wh outdoor mobile power bank or 1200W/2.5L generator is recommended.
4. Air module
5. Ground module
Items |
Technical parameters |
|
Ambient temperature |
-20~45 ℃ (working), -40~65 ℃ (storage) |
|
Relative humidity |
10-80% RH (working), 5-90% RH (storage) |
|
Altitude |
≤ 3000m |
|
Ground power module |
Input voltage |
190-240Vac wide range input, single-phase 220Vac, frequency 45-65Hz |
Output power |
800W (rated long-term output), 1000W (peak value ≥ 30s) |
|
Storage cable length |
Standard storage cable 55m |
|
Interface |
Input socket with switch, cable output locking aviation plug |
|
Button |
High voltage button, take-up button, alarm indicator light |
|
Protection level |
IPx4 |
|
Size |
D265 *W150*H175 ± 0.5mm, excluding foot pads and handles |
|
Weight |
4.2 ± 0.1kg, including 33m tethered cable |
|
Tether cable |
Material quality |
Silver plated lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer |
DC resistance |
26 ± 0.2 Ω, 100m@20 ℃ loop |
|
Tensile strength |
≥ 50kg, resistant to repeated retraction and release times ≥ 500 times |
|
Insulation strength |
≥ 3000Vdc, no breakdown for 1 minute |
|
Cable length |
55 ± 2m, supports customized line length |
|
External diameter |
2.0 ± 0.1mm |
|
Weight |
4.6 g/meter |
|
Air module |
Input voltage |
330-430Vdc wide range input |
Output voltage |
16.5±0.2Vdc or 25±0.3Vdc, constant voltage output, supporting voltage customization |
|
Output power |
600W (rated long-term output), 800W (peak value ≥ 10s) |
|
Protection Function |
Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, and over temperature protection |
|
Isolation voltage |
3000V (Vin Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon |
|
Installation method |
Reserved installation ears, fixed with screws |
|
Heat dissipation method |
Passive heat dissipation, natural air cooling of heat dissipation teeth |
|
Interface |
Input XT60, output XT30*2 |
|
Protection level |
IP54 |
|
Size |
105*56*32±0.5mm, Excluding installation ears |
|
Weight |
220 ± 10g, without external connectors |
1. Unless otherwise specified, the above data are all tested at Ta=25 ℃, humidity<75%, nominal input, and rated load.
2. Due to space limitations, there is incomplete data in the table. If necessary, please contact our sales personnel to obtain it.